100% original, designed and produced by hugen (zeenko).

We are an officially authorized store, please feel free to purchase.

Features:

– Screen size 4 inch

– Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz

– Signal Generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz when not used as Spectrum Analyzer.

– Switchable resolution bandpass filters for both ranges between 200Hz and 850kHz

– Built-in 20dB optional LNA

– Color display showing 450 scan points covering up to the full frequency range.

– Input Step attenuator from 0dB to 31dB (not in combination with LNA).

– A built-in calibration signal generator that is used for automatic self test and (low) input calibration.

– Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator

– Rechargeable battery allowing a minimum of at least 2 hours portable use

– Max input level +10dBm. Do not destroy your tinySA

– Due to the low cost and very small form factor there are certain relevant tinySA limitations and tinySA Ultra limitations

The tinySA ULTRA includes:

Host (with 3000mAh battery, 4″display) x 1

USB Type-C data cable x1

30cm ALSR100 SMA cables x2

SMA-SMA barrel connector x1

Antenna with SMA connector x1

Lanyard and touch plectrum x1

32GB MicroSD card(plugged in the host) x1